Dry Moly Spray
The content of dry moly spray has a higher amount of molybdenum disulphide film. Their design takes place in such a manner for lubrication of the sliding mechanisms like pins, palm bearings, slide or cams where it is not possible to use a wet lubricant. Coming to MOS2 it happens to be a great lubricant, and to high loads the resistance is higher. It is available in the form of an aerosol and dry moly spray is an example of the same. Even dry moly spray is present in the form of a paste.
In depth analysis of dry moly spray
As discussed earlier some of the application areas are pins, chains, calms , fasteners, plain bearings etc. Some of the benefits along with features are
• Excellent form of wear resistance
• The assemblies can be easy removed
• The temperature range tends to be outstanding
• The co-efficient of fiction improves, though more information is necessary to be obtained on the same.
• A dry film lubricant, as it is known to resist prevention of contaminants like debris or dust etc.
• Resistance to higher form of loads
• Prevention of pick- up
The storage temperature of dry moly spray should be less than 50 degree Celsius and it is better if you do not expose it to direct sunlight. From the date of manufacturing the shelf life is 2 years. It is better to spray, dip or brush the application. Make sure that you treat the surface to be dry, clean and eradicate any form of oil, dirt contamination.
In addition it happens to be a highly inflammable product and make sure it is only used in well ventilated areas. Make sure that there are no options of ignition. Apart from this dry moly spray has to be properly agitated. Following the process of heat curing, adhesion can be improved. Even it can be cooled for 3 hours at a stretch. The film that is cured can be improved by burnishing and with a tinge of free tint cloth. There are a series of methods to calculate the correct torque size.
